JWedge

Loads and Water Inputs

Configure external forces, seismic loading, face pressures, and joint water.

External Force

InputRange/unitsDescription
Enable external forceOn/offIncludes the external force vector in the active force balance.
MagnitudekNMagnitude of the applied external vector.
Trend0 to 360 degreesAzimuth of the external force vector.
Plunge-90 to 90 degreesVertical inclination of the external force vector; positive is downward in the app convention.

Seismic Load

InputRange/unitsDescription
Enable seismic loadOn/offIncludes seismic loading in the active force vector.
Seismic Coefficient>= 0Multiplier applied with unit weight and wedge volume.
Trend0 to 360 degreesAzimuth of the seismic force vector.
Plunge-90 to 90 degreesVertical inclination of the seismic force vector.

Face Pressure Table

RowMagnitude unitsDescription
Active SlopekPaPressure applied to the slope face in the configured active direction.
Active UpperkPaPressure applied to the upper face in the configured active direction.
Passive SlopekPaPressure applied to the slope face as passive resistance.
Passive UpperkPaPressure applied to the upper face as passive resistance.
Trend / PlungedegreesDirection vector for each pressure row.

Joint Water

InputRange/unitsDescription
Enable joint waterOn/offIncludes joint water force in the active vector.
Joint Water ModeConstant Pressure or GravitationalConstant mode uses entered pressures on each joint. Gravitational mode estimates pressure from fill percentage and water unit weight.
Water Unit WeightkN/m3Unit weight of water used in gravitational mode.
Joint 1 PressurekPaConstant water pressure applied to Joint 1.
Joint 2 PressurekPaConstant water pressure applied to Joint 2.
Percent Filled0 to 100 percentWater fill level used in gravitational mode.